Remove hard-coded destination paths for debian package creation.

Make external CC declaration possible

Add piMemorySize for rpi4b

#include <stdio.h>

int main()
{
	int bRev, bType, bProc, bMfg, bMem, bWarranty ;
	int revision = 12595474; //Convert hexadecimal to decimal
	bRev      = (revision & (0x0F <<  0)) >>  0 ;
        bType     = (revision & (0xFF <<  4)) >>  4 ;
        bProc     = (revision & (0x0F << 12)) >> 12 ;	// Not used for now.
        bMfg      = (revision & (0x0F << 16)) >> 16 ;
        bMem      = (revision & (0x07 << 20)) >> 20 ;
       bWarranty = (revision & (0x03 << 24)) != 0 ;
       printf ("piBoardId: rev: %d, type: %d, proc: %d, mfg: %d, mem: %d, warranty: %d\n",
		bRev, bType, bProc, bMfg, bMem, bWarranty) ;

   return 0;
}

/* revision see https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md 
*RPI revision is HEX.*\

Keeping compatibility of hardware clock of Pi 4 with earlier versions.

With Gordon ending development of WiringPi, this repository needs to reflect the situation accurately and differentiate between Gordon's final code release and updates made since then.

Add support for Raspberry Pi 4B

Now that the upstream maintainer has abandoned this project without
establishing another maintainer, its difficult to choose an appropriate
version number. Going with 2.60 for now, as this only has incremental
changes to support 4B.

Based on this raspi-gpio commit[1] the 2711 chip uses a different method
for pull up/down. This change implements that same method.

With this change, wiringPi now works for the Pi4B with the subset of
functionality used by zynthian.

[1] 80fa7d04ea?diff=unified

This change make the following commands correctly detect the 4B
however there may be an issue with reading GPIO inputs on the 4B
as they are always returning zero.

The aim of this change is to be the source-equivalent of the binary
package release 2.52[1] which was the last release before upstream
development ceased.

[1] http://wiringpi.com/wiringpi-updated-to-2-52-for-the-raspberry-pi-4b/

Sourced from http://archive.ubuntu.com/ubuntu/pool/universe/w/wiringpi/wiringpi_2.50.orig.tar.gz

Added gpio readall support for the Pi 0W.

Added fixed for a few minor things. pin driver for rht03/dht type
sensors. Network stuff is experimental - for now.

Fixed some compiler warnings.
New wiringPi version mechanism.
Put 4800 baud (back) into the system.
Re-added piBoardRev (really an alias of piGpioLayout())

for kernels 4.8 onwards.

Some very old stuff might break.

Additional fixes for the ISR code and some tweaks here and
there. I've removed the checks for some operations that might
fail when using the gpiomem interface - which is now the default
way of doing things - if your program segfaults, then you
may need to use sudo on it.

Updating the GPIO command - new command - allreadall
ScrollPhat code
max31855 code (tested with adafruit breakout board)
more tests
updated rht03 code

Raspberry Pi v3 support.

PULSE_TIME wasn't used.

delete duplicated FSEL_ALT0 definition.

Added support for the ADS1115 16-bit ADC
Updated the gpio readall command to correctly with with the Compute Module
and fixed a resulting bug in wiringPi...

Also affects the Pi v2 which also uses the new Revision
encoding scheme (It was slightly bodged before) This ought
to be relatively future proof, but who knows.

Fixed a minor thing in the examples Makefile
(not that anyone bothers to use it, judging by the emails I get )-:

Also adding in the stuff for /dev/gpiomem with warnings
and information in the gpio manual page (who reads that
though!)

Updated the gpio program to be device tree aware.

help.

It's not perfect - there is no symbol versioning, and I have had to
make some (perhaps false) assumptions about library ABI stability, but
it does produce something vaguely resembling what would be expected
from a library package found in Debian, and it does so using the
standard Debian source format.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>

This makes it possible for the caller of ./build to add a version
number to the sonames of the shared libraries.  (This is required for
Debian packages.)

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>

This makes it possible for the caller of ./build to suppress the
chown/chmod of the gpio utility.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>

This is not set in normal shell sessions.

Honouring an existing setting of LDCONFIG allows the caller of ./build
to specify an alternative program to run.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>