WiringPi

Graf revizí

Autor	SHA1	Zpráva	Datum
schwartz	a682a01a25	Changes to support the Zero 2 W (model type 18\|0x12)	před 3 roky
toca21	5cabf4a4f8	Fixed the Compute Module 4 pin mode setting. The CM4 is equal to RB4 std platform, not CM3 family as it turned out.	před 3 roky
fanoush	1aed7f7c9d	Add support for Pi 400 and CM4	před 4 roky
Steve Baker	aca883a051	Add support for Raspberry Pi 4B This change make the following commands correctly detect the 4B however there may be an issue with reading GPIO inputs on the 4B as they are always returning zero. The aim of this change is to be the source-equivalent of the binary package release 2.52[1] which was the last release before upstream development ceased. [1] http://wiringpi.com/wiringpi-updated-to-2-52-for-the-raspberry-pi-4b/	před 5 roky
Steve Baker	03204c3807	Sync with changes from wiringpi_2.50.orig.tar.gz Sourced from http://archive.ubuntu.com/ubuntu/pool/universe/w/wiringpi/wiringpi_2.50.orig.tar.gz	před 5 roky
Gordon Henderson	8d188fa0e0	update for the v3+	před 6 roky
Gordon Henderson	e8da87fbac	Added a fix to include -lcrypt for people who can't do it themselves. Added gpio readall support for the Pi 0W.	před 7 roky
Gordon Henderson	e687f3f2c6	Pushing to 2.39 as I have have not done the last one rightly...	před 7 roky
Gordon Henderson	b1dfc186ef	A new version of wiringPi. Added in more stuff and fixed it up for kernels 4.8 onwards. Some very old stuff might break. Additional fixes for the ISR code and some tweaks here and there. I've removed the checks for some operations that might fail when using the gpiomem interface - which is now the default way of doing things - if your program segfaults, then you may need to use sudo on it.	před 8 roky
Gordon Henderson	b0a60c3302	Many changes - tidying up the extensions interfaces. Updating the GPIO command - new command - allreadall ScrollPhat code max31855 code (tested with adafruit breakout board) more tests updated rht03 code Raspberry Pi v3 support.	před 8 roky
Phil Howard	26c7fe3332	Updated from git.drogon.net	před 8 roky
Gordon Henderson	143b383b8d	Added support for the Pimoroni scrollPhat Added support for the ADS1115 16-bit ADC Updated the gpio readall command to correctly with with the Compute Module and fixed a resulting bug in wiringPi...	před 8 roky
Gordon Henderson	31a8a2cdb8	gpio readall didn't work on the Zero. This fixed that little goof	před 9 roky
Gordon Henderson	eb1fc2c920	Updates to the build process Moved the extensions into wiringPi from gpio and made it more general purpose more so that RTB and anything else can dymanically add devices into wiringPi. Changes to GPIO to updates for the SPI and I2C module loads Added gpio unload for SPI and I2C. Added a new way to setup SPI - by passing the mode in. Support for the new Pi2 thing too	před 9 roky
Gordon Henderson	0a9fdeb29d	Minor changes to the PiGlow code - got the orange & yellow the right way round at last.. Updated for the 0x0012 board revision on the new A+	před 10 roky
Gordon Henderson	df45388f64	Fixed a bug in the gpio readall command on model B's (caused by a side-effect of changing it for the B+) Aded a gpio command: usbp hi/low - to change the usb power	před 10 roky
Gordon Henderson	dca8a19fb8	Updated mostly to the gpio readall command to support the Raspberry Pi B+	před 10 roky
Gordon Henderson	6fba403b2f	Updates for the Raspnerry Pi Compute Module - changes to the gpio program to produce a nicer 'readall' output too. It also understands new pins 53,54,55 and 56 in wiringPiSetupPhys() mode to represent the pins on the P5 connector on the Rev 2 Pi's Changes to pinMode() to allow new modes SOFT_PWM and SOFT_TONE.	před 10 roky
Gordon Henderson	8c8578a26b	Reverted gpio readall to older version - new version is gpio nreadall fixed the max5322 code.	před 11 roky
Gordon Henderson	02a3bd8d8f	Readall command in gpio changed.	před 11 roky

19 Revize (3144bd9d3be69ef840737a9224c837334f170ce8)