Replaces a bare wait() with waitpid() to only wait on the just-forked process.

Remove projects@drogon.net contact from build

GitHub Actions

* Fix for multiple definition of comDat

Add piMemorySize for rpi4 8G

Add support for Pi 400 and CM4

Remove hard-coded destination paths for debian package creation.

Make external CC declaration possible

Add piMemorySize for rpi4b

#include <stdio.h>

int main()
{
	int bRev, bType, bProc, bMfg, bMem, bWarranty ;
	int revision = 12595474; //Convert hexadecimal to decimal
	bRev      = (revision & (0x0F <<  0)) >>  0 ;
        bType     = (revision & (0xFF <<  4)) >>  4 ;
        bProc     = (revision & (0x0F << 12)) >> 12 ;	// Not used for now.
        bMfg      = (revision & (0x0F << 16)) >> 16 ;
        bMem      = (revision & (0x07 << 20)) >> 20 ;
       bWarranty = (revision & (0x03 << 24)) != 0 ;
       printf ("piBoardId: rev: %d, type: %d, proc: %d, mfg: %d, mem: %d, warranty: %d\n",
		bRev, bType, bProc, bMfg, bMem, bWarranty) ;

   return 0;
}

/* revision see https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md 
*RPI revision is HEX.*\

Keeping compatibility of hardware clock of Pi 4 with earlier versions.

With Gordon ending development of WiringPi, this repository needs to reflect the situation accurately and differentiate between Gordon's final code release and updates made since then.

Add support for Raspberry Pi 4B

Now that the upstream maintainer has abandoned this project without
establishing another maintainer, its difficult to choose an appropriate
version number. Going with 2.60 for now, as this only has incremental
changes to support 4B.

Based on this raspi-gpio commit[1] the 2711 chip uses a different method
for pull up/down. This change implements that same method.

With this change, wiringPi now works for the Pi4B with the subset of
functionality used by zynthian.

[1] 80fa7d04ea?diff=unified

This change make the following commands correctly detect the 4B
however there may be an issue with reading GPIO inputs on the 4B
as they are always returning zero.

The aim of this change is to be the source-equivalent of the binary
package release 2.52[1] which was the last release before upstream
development ceased.

[1] http://wiringpi.com/wiringpi-updated-to-2-52-for-the-raspberry-pi-4b/

Sourced from http://archive.ubuntu.com/ubuntu/pool/universe/w/wiringpi/wiringpi_2.50.orig.tar.gz

Added gpio readall support for the Pi 0W.

Added fixed for a few minor things. pin driver for rht03/dht type
sensors. Network stuff is experimental - for now.

Fixed some compiler warnings.
New wiringPi version mechanism.
Put 4800 baud (back) into the system.
Re-added piBoardRev (really an alias of piGpioLayout())

for kernels 4.8 onwards.

Some very old stuff might break.

Additional fixes for the ISR code and some tweaks here and
there. I've removed the checks for some operations that might
fail when using the gpiomem interface - which is now the default
way of doing things - if your program segfaults, then you
may need to use sudo on it.

Updating the GPIO command - new command - allreadall
ScrollPhat code
max31855 code (tested with adafruit breakout board)
more tests
updated rht03 code

Raspberry Pi v3 support.

PULSE_TIME wasn't used.

delete duplicated FSEL_ALT0 definition.