Merge branch 'WiringPi:master' into master

VERSION

@@ -1 +1 @@
-2.61
+2.70

build

@@ -110,22 +110,6 @@ fi
 
   hardware=`fgrep Hardware /proc/cpuinfo | head -1 | awk '{ print $3 }'`
 
-#  if [ x$hardware != "xBCM2708" ]; then
-#    echo ""
-#    echo "   +------------------------------------------------------------+"
-#    echo "   |   wiringPi is designed to run on the Raspberry Pi only.    |"
-#    echo "   |   This processor does not appear to be a Raspberry Pi.     |"
-#    echo "   +------------------------------------------------------------+"
-#    echo "   | In the unlikely event that you think it is a Raspberry Pi, |"
-#    echo "   | then please accept my apologies and email the contents of  |"
-#    echo "   | /proc/cpuinfo to projects@drogon.net.                      |"
-#    echo "   |    - Thanks, Gordon                                        |"
-#    echo "   +------------------------------------------------------------+"
-#    echo ""
-#    exit 1
-#  fi
-
-
   echo
   echo "WiringPi Library"
   cd wiringPi

debian-template/wiringPi/DEBIAN/control

@@ -1,10 +1,13 @@
 Package: wiringpi
-Version: 2.61
+Version: 2.70
 Section: libraries
 Priority: optional
 Architecture: armhf
 Depends: libc6
-Maintainer: Gordon Henderson <projects@drogon.net>
+Maintainer: Phil Howard <wiringpi@gadgetoid.com>
+Uploaders: Phil Howard <wiringpi@gadgetoid.com>
 Description: The wiringPi libraries, headers and gpio command
   Libraries to allow GPIO access on a Raspberry Pi from C and C++
   and BASIC programs as well as from the command-line
+Homepage: https://github.com/WiringPi/WiringPi/
+Bugs: https://github.com/WiringPi/WiringPi/

debian/control

@@ -3,7 +3,7 @@ Section: electronics
 Priority: optional
 Maintainer: Ian Jackson <ijackson@chiark.greenend.org.uk>
 Standards-Version: 3.8.0
-Homepage: http://wiringpi.com/
+Homepage: https://github.com/WiringPi/WiringPi
 Build-Depends: debhelper (>= 8)
 
 Package: libwiringpi2

devLib/Makefile

@@ -5,7 +5,7 @@
 #	Copyright (c) 2012-2016 Gordon Henderson
 #################################################################################
 # This file is part of wiringPi:
-#	https://projects.drogon.net/raspberry-pi/wiringpi/
+#	https://github.com/wiringPi/wiringPi
 #
 #    wiringPi is free software: you can redistribute it and/or modify
 #    it under the terms of the GNU Lesser General Public License as published by

devLib/ds1302.c

@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/ds1302.h

@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/gertboard.c

@@ -13,7 +13,7 @@
  *
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

devLib/gertboard.h

@@ -8,7 +8,7 @@
  *
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

devLib/lcd.c

@@ -7,7 +7,7 @@
  * Copyright (c) 2012 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/lcd.h

@@ -7,7 +7,7 @@
  * Copyright (c) 2012 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/lcd128x64.c

@@ -13,7 +13,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/lcd128x64.h

@@ -4,7 +4,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/maxdetect.c

@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/maxdetect.h

@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/piFace.c

@@ -6,7 +6,7 @@
  *	Copyright (c) 2012-2013 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

devLib/piFace.h

@@ -4,7 +4,7 @@
  *	Copyright (c) 2012-2013 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/piFaceOld.c

@@ -6,7 +6,7 @@
  *	has an MCP23S17 GPIO device connected via the SPI bus.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

devLib/piGlow.c

@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/piGlow.h

@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/piNes.c

@@ -4,7 +4,7 @@
  *	Copyright (c) 2012 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

devLib/piNes.h

@@ -4,7 +4,7 @@
  *	Copyright (c) 2012 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

devLib/scrollPhat.c

@@ -5,7 +5,7 @@
  * Copyright (c) 2015 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/scrollPhat.h

@@ -5,7 +5,7 @@
  * Copyright (c) 2015 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

devLib/scrollPhatFont.h

@@ -8,7 +8,7 @@
  * Copyright (c) 2015-2016 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/Gertboard/buttons.c

@@ -1,12 +1,12 @@
 /*
  * buttons.c:
  *	Read the Gertboard buttons. Each one will act as an on/off
- *	tiggle switch for 3 different LEDs
+ *	toggle switch for 3 different LEDs
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/Gertboard/gertboard.c

@@ -7,12 +7,12 @@
  *
  *	We output a sine wave on D/A port 0 and sample A/D port 0. We then
  *	plot the input value on the terminal as a sort of vertical scrolling
- *	oscilloscipe.
+ *	oscilloscope.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/Gertboard/temperature.c

@@ -3,10 +3,10 @@
  *	Demonstrate use of the Gertboard A to D converter to make
  *	a simple thermometer using the LM35.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/Gertboard/voltmeter.c

@@ -3,10 +3,10 @@
  *	Demonstrate use of the Gertboard A to D converter to make
  *	a simple voltmeter.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/Makefile

@@ -1,7 +1,7 @@
 #
 # Makefile:
 #	wiringPi - A "wiring" library for the Raspberry Pi
-#	https://projects.drogon.net/wiring-pi
+#	https://github.com/wiringPi/wiringPi
 #
 #	Copyright (c) 2012-2015 Gordon Henderson
 #################################################################################

examples/PiFace/Makefile

@@ -1,7 +1,7 @@
 #
 # Makefile:
 #	wiringPi - A "wiring" library for the Raspberry Pi
-#	https://projects.drogon.net/wiring-pi
+#       https://github.com/wiringPi/wiringPi
 #
 #	Copyright (c) 2012 Gordon Henderson
 #################################################################################

examples/PiFace/blink.c

@@ -2,10 +2,10 @@
  * blink.c:
  *	Simple "blink" test for the PiFace interface board.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/PiFace/buttons.c

@@ -4,10 +4,10 @@
  *
  *	Read the buttons and output the same to the LEDs
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/PiFace/metro.c

@@ -2,10 +2,10 @@
  * metronome.c:
  *	Simple test for the PiFace interface board.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/PiFace/motor.c

@@ -4,10 +4,10 @@
  *	circuit via the 2 relays.
  *	Then add on an external transsitor to help with PWM.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/PiFace/reaction.c

@@ -2,10 +2,10 @@
  * reaction.c:
  *	Simple test for the PiFace interface board.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/PiGlow/Makefile

@@ -1,7 +1,7 @@
 #
 # Makefile:
 #	wiringPi - A "wiring" library for the Raspberry Pi
-#	https://projects.drogon.net/wiring-pi
+#	https://github.com/wiringPi/wiringPi
 #
 #	Copyright (c) 2012-2015 Gordon Henderson
 #################################################################################

examples/PiGlow/piGlow0.c

@@ -8,7 +8,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/PiGlow/piGlow1.c

@@ -6,7 +6,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/PiGlow/piglow.c

@@ -6,7 +6,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/blink-thread.c

@@ -3,10 +3,10 @@
  *	Standard "blink" program in wiringPi. Blinks an LED connected
  *	to the first GPIO pin.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/blink.c

@@ -3,10 +3,10 @@
  *	Standard "blink" program in wiringPi. Blinks an LED connected
  *	to the first GPIO pin.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/blink.rtb

@@ -1,10 +1,10 @@
 // blink.rtb:
 //    Blink program in Return to Basic
 //
-// Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+// Copyright (c) 2012-2013 Gordon Henderson.
 //**********************************************************************
 // This file is part of wiringPi:
-//	https://projects.drogon.net/raspberry-pi/wiringpi/
+//      https://github.com/WiringPi/WiringPi
 //
 //    wiringPi is free software: you can redistribute it and/or modify
 //    it under the terms of the GNU Lesser General Public License as published by

examples/blink.sh

@@ -4,10 +4,10 @@
 #	Standard "blink" program in wiringPi. Blinks an LED connected
 #	to the first GPIO pin.
 #
-# Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+# Copyright (c) 2012-2013 Gordon Henderson.
 #######################################################################
 # This file is part of wiringPi:
-#	https://projects.drogon.net/raspberry-pi/wiringpi/
+#       https://github.com/WiringPi/WiringPi
 #
 #    wiringPi is free software: you can redistribute it and/or modify
 #    it under the terms of the GNU Lesser General Public License as published by

examples/blink12.c

@@ -3,10 +3,10 @@
  *	Simple sequence over the first 12 GPIO pins - LEDs
  *	Aimed at the Gertboard, but it's fairly generic.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/blink12drcs.c

@@ -2,12 +2,12 @@
  * blink12drcs.c:
  *	Simple sequence over the first 12 GPIO pins - LEDs
  *	Aimed at the Gertboard, but it's fairly generic.
- *	This version uses DRC totalk to the ATmega on the Gertboard
+ *	This version uses DRC to talk to the ATmega on the Gertboard
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/blink6drcs.c

@@ -4,10 +4,10 @@
  *	Aimed at the Gertduino, but it's fairly generic.
  *	This version uses DRC to talk to the ATmega on the Gertduino
  *
- * Copyright (c) 2012-2014 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2014 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/blink8-drcn.c

@@ -3,10 +3,10 @@
  *	Simple sequence over the first 8 GPIO pins - LEDs
  *	Aimed at the Ladder board, but it's fairly generic.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/blink8.c

@@ -3,10 +3,10 @@
  *	Simple sequence over the first 8 GPIO pins - LEDs
  *	Aimed at the Gertboard, but it's fairly generic.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/clock.c

@@ -16,7 +16,7 @@
  * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/delayTest.c

@@ -3,10 +3,10 @@
  *	Just a little test program I'm using to experiment with
  *	various timings and latency, etc.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/ds1302.c

@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/header.h

@@ -1,10 +1,10 @@
 /*
  * file.c:
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/isr-osc.c

@@ -5,7 +5,7 @@
  *	How to test:
  *
  *	IMPORTANT: To run this test we connect 2 GPIO pins together, but
- *	before we do that YOU must make sure that they are both setup
+ *	before we do that YOU must make sure that they are both set up
  *	the right way. If they are set to outputs and one is high and one low,
  *	then you connect the wire, you'll create a short and that won't be good.
  *
@@ -23,10 +23,10 @@
  *	then do the up/down toggling for itself and run at full speed, and
  *	it will report the number of interrupts recieved every second.
  *
- *	Copyright (c) 2013 Gordon Henderson. projects@drogon.net
+ *	Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/isr.c

@@ -14,7 +14,7 @@
  * Copyright (c) 2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/lcd-adafruit.c

@@ -7,7 +7,7 @@
  * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by
@@ -271,8 +271,8 @@ int main (int argc, char *argv[])
 
   adafruitLCDSetup (colour) ;
 
-  lcdPosition (lcdHandle, 0, 0) ; lcdPuts (lcdHandle, "Gordon Henderson") ;
-  lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, "  wiringpi.com  ") ;
+  lcdPosition (lcdHandle, 0, 0) ; lcdPuts (lcdHandle, "  Hello World   ") ;
+  lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, "    wiringpi    ") ;
 
   waitForEnter () ;
 

examples/lcd.c

@@ -19,7 +19,7 @@
  * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by
@@ -215,14 +215,14 @@ int main (int argc, char *argv[])
     return -1 ;
   }
 
-  lcdPosition (lcdHandle, 0, 0) ; lcdPuts (lcdHandle, "Gordon Henderson") ;
-  lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, "  wiringpi.com  ") ;
+  lcdPosition (lcdHandle, 0, 0) ; lcdPuts (lcdHandle, "Hello World") ;
+  lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, "  wiringpi  ") ;
 
   waitForEnter () ;
 
   if (rows > 1)
   {
-    lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, "  wiringpi.com  ") ;
+    lcdPosition (lcdHandle, 0, 1) ; lcdPuts (lcdHandle, "  wiringpi  ") ;
 
     if (rows == 4)
     {

examples/lowPower.c

@@ -9,7 +9,7 @@
  * Copyright (c) 2014 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/max31855.c

@@ -5,7 +5,7 @@
  * Copyright (c) 2015 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/nes.c

@@ -2,10 +2,10 @@
  * nes.c:
  *	Test program for an old NES controller connected to the Pi.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/okLed.c

@@ -9,10 +9,10 @@
  *    e.g. by putting it in /etc/rc.local and running it in the
  *    background &
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/pwm.c

@@ -2,10 +2,10 @@
  * pwm.c:
  *	This tests the hardware PWM channel.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/q2w/Makefile

@@ -1,7 +1,7 @@
 #
 # Makefile:
 #	wiringPi - A "wiring" library for the Raspberry Pi
-#	https://projects.drogon.net/wiring-pi
+#	https://github.com/wiringPi/wiringPi
 #
 #	Copyright (c) 2012-2013 Gordon Henderson
 #################################################################################

examples/q2w/binary.c

@@ -3,10 +3,10 @@
  *      Using the Quick 2 wire 16-bit GPIO expansion board to output
  *	a binary counter.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/q2w/blink-io.c

@@ -2,10 +2,10 @@
  * blink-io.c:
  *	Simple "blink" test for the Quick2Wire 16-pin IO board.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/q2w/blink.c

@@ -2,10 +2,10 @@
  * blink.c:
  *	Simple "blink" test for the Quick2Wire interface board.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/q2w/blink.sh

@@ -4,10 +4,10 @@
 #	Standard "blink" program in wiringPi. Blinks an LED connected
 #	to the LED on the Quick2Wire board
 #
-# Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+# Copyright (c) 2012-2013 Gordon Henderson.
 #######################################################################
 # This file is part of wiringPi:
-#	https://projects.drogon.net/raspberry-pi/wiringpi/
+#       https://github.com/WiringPi/WiringPi
 #
 #    wiringPi is free software: you can redistribute it and/or modify
 #    it under the terms of the GNU Lesser General Public License as published by

examples/q2w/bright.c

@@ -2,10 +2,10 @@
  * bright.c:
  *	Vary the Q2W LED brightness with the analog card
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/q2w/button.c

@@ -2,10 +2,10 @@
  * button.c:
  *	Simple button test for the Quick2Wire interface board.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/q2w/volts.c

@@ -2,10 +2,10 @@
  * volts.c:
  *	Read in all 4 analogs on the Q2W analog board.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/rht03.c

@@ -2,10 +2,10 @@
  * rht03.c:
  *	Driver for the MaxDetect series sensors
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/scrollPhat/Makefile

@@ -1,7 +1,7 @@
 #
 # Makefile:
 #	wiringPi - A "wiring" library for the Raspberry Pi
-#	https://projects.drogon.net/wiring-pi
+#	https://github.com/wiringPi/wiringPi
 #
 #	Copyright (c) 2012-2015 Gordon Henderson
 #################################################################################

examples/scrollPhat/scphat.c

@@ -1,12 +1,12 @@
 /*
  * scphat.c:
- *	Little program to allow use of the Pimoroni Sctoll Phat
+ *	Little program to allow use of the Pimoroni Scroll pHAT
  *	from the command-line.
  *
- * Copyright (c) 2015-2016 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2015-2016 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/scrollPhat/test.c

@@ -1,11 +1,11 @@
 /*
  * test.c:
- *	Little test program forthe Pimoroni Scroll Phat.
+ *	Little test program for the Pimoroni Scroll pHAT.
  *
- * Copyright (c) 2015-2016 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2015-2016 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/serialRead.c

@@ -2,10 +2,10 @@
  * serial.c:
  *	Example program to read bytes from the Serial line
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/serialTest.c

@@ -3,10 +3,10 @@
  *	Very simple program to test the serial port. Expects
  *	the port to be looped back to itself
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/servo.c

@@ -3,10 +3,10 @@
  *	Test of the softServo code.
  *	Do not use this code - use the servoBlaster kernel module instead
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/softPwm.c

@@ -3,10 +3,10 @@
  *	Test of the software PWM driver. Needs 8 LEDs connected
  *	to the Pi - e.g. Ladder board.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/softTone.c

@@ -3,10 +3,10 @@
  *	Test of the softTone module in wiringPi
  *	Plays a scale out on pin 3 - connect pizeo disc to pin 3 & 0v
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/speed.c

@@ -3,10 +3,10 @@
  *	Simple program to measure the speed of the various GPIO
  *	access mechanisms.
  *
- * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *      https://github.com/WiringPi/WiringPi
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

examples/spiSpeed.c

@@ -4,7 +4,7 @@
  *	Copyright (c) 2014 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

examples/wfi.c

@@ -15,7 +15,7 @@
  * Copyright (c) 2012-2013 Gordon Henderson.
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

gpio/Makefile

@@ -2,7 +2,7 @@
 # Makefile:
 #	The gpio command:
 #	  A swiss-army knige of GPIO shenanigans.
-#	https://projects.drogon.net/wiring-pi
+#	https://github.com/wiringPi/wiringPi
 #
 #	Copyright (c) 2012-2016 Gordon Henderson
 #################################################################################

gpio/gpio.1

@@ -105,7 +105,6 @@ BCM_GPIO pin numbers are always used with the export and edge commands.
 This causes the named extension to be initialised. Extensions
 comprise of a name (e.g. mcp23017) followed by a colon, then the
 pin-base, then more optional parameters depending on the extension type.
-See the web page on http://wiringpi.com/the-gpio-utility/
 
 .TP
 .B \-p
@@ -329,7 +328,7 @@ in future releases once the /dev/gpiomem interface is fully operational.
 .LP
 WiringPi's home page
 .IP
-http://wiringpi.com/
+https://github.com/WiringPi/WiringPi/
 
 .SH AUTHOR
 

gpio/gpio.c

@@ -5,7 +5,7 @@
  *	Copyright (c) 2012-2018 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

gpio/readall.c

@@ -4,7 +4,7 @@
  *	Copyright (c) 2012-2018 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as published by

newVersion

@@ -40,8 +40,11 @@ Section: libraries
 Priority: optional
 Architecture: armhf
 Depends: libc6
-Maintainer: Gordon Henderson <projects@drogon.net>
+Maintainer: Phil Howard <wiringpi@gadgetoid.com>
+Uploaders: Phil Howard <wiringpi@gadgetoid.com>
 Description: The wiringPi libraries, headers and gpio command
   Libraries to allow GPIO access on a Raspberry Pi from C and C++
   and BASIC programs as well as from the command-line
+Homepage: https://github.com/WiringPi/WiringPi/
+Bugs: https://github.com/WiringPi/WiringPi/
 EOF

pins/pins.tex

@@ -37,7 +37,7 @@
 
 \begin{center}
 \bfseries{WiringPi: GPIO Pin Numbering Tables}\\
-\tt{http://wiringpi.com/}
+\tt{https://github.com/WiringPi/WiringPi}
 \end{center}
 
 \begin{center}

version.h

@@ -1,3 +1,3 @@
-#define VERSION "2.61"
+#define VERSION "2.70"
 #define VERSION_MAJOR 2
-#define VERSION_MINOR 61
+#define VERSION_MINOR 70

wiringPi/Makefile

@@ -5,7 +5,7 @@
 #	Copyright (c) 2012-2015 Gordon Henderson
 #################################################################################
 # This file is part of wiringPi:
-#	https://projects.drogon.net/raspberry-pi/wiringpi/
+#	https://github.com/wiringPi/wiringPi
 #
 #    wiringPi is free software: you can redistribute it and/or modify
 #    it under the terms of the GNU Lesser General Public License as published by

wiringPi/ads1115.c

@@ -4,7 +4,7 @@
  *	Copyright (c) 2016 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/ads1115.h

@@ -4,7 +4,7 @@
  *	Copyright (c) 2016 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/bmp180.c

@@ -10,7 +10,7 @@
  *
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/bmp180.h

@@ -5,7 +5,7 @@
  *	Copyright (c) 2016 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/drcNet.c

@@ -4,7 +4,7 @@
  *	Copyright (c) 2016-2017 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/drcNet.h

@@ -4,7 +4,7 @@
  *	Copyright (c) 2016-2017 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/drcSerial.c

@@ -4,7 +4,7 @@
  *	Copyright (c) 2013-2016 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/drcSerial.h

@@ -4,7 +4,7 @@
  *	Copyright (c) 2013 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/ds18b20.c

@@ -5,7 +5,7 @@
  *	Copyright (c) 2016 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as

wiringPi/ds18b20.h

@@ -5,7 +5,7 @@
  *	Copyright (c) 2016 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
- *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *	https://github.com/WiringPi/WiringPi/
  *
  *    wiringPi is free software: you can redistribute it and/or modify
  *    it under the terms of the GNU Lesser General Public License as