update for the v3+

INSTALL

@@ -19,13 +19,6 @@ then run the ldconfig command.
 
   sudo ldconfig
 
-If you want to install a static library, you may need to do this manually:
-
-  cd wiringPi
-  make static
-  sudo make install-static
-
-
 To un-install wiringPi:
 
   ./build uninstall

VERSION

@@ -1 +1 @@
-2.44
+2.46

build

@@ -64,6 +64,9 @@ if [ x$1 = "xclean" ]; then
   echo -n "PiGlow:     "	; make clean
   cd ../scrollPhat
   echo -n "scrollPhat: "	; make clean
+  cd ../..
+  echo -n "Deb: " ; rm  -f debian-template/wiringpi*.deb
+  echo
   exit
 fi
 

debian-template/wiringPi/DEBIAN/control

@@ -1,5 +1,5 @@
 Package: wiringpi
-Version: 2.44
+Version: 2.46
 Section: libraries
 Priority: optional
 Architecture: armhf

gpio/pins.c → examples/blink-thread.c

@@ -1,7 +1,9 @@
 /*
- * pins.c:
- *	Just display a handy Pi pinnout diagram.
- *	Copyright (c) 2012-2017 Gordon Henderson
+ * blink-thread.c:
+ *	Standard "blink" program in wiringPi. Blinks an LED connected
+ *	to the first GPIO pin.
+ *
+ * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
  ***********************************************************************
  * This file is part of wiringPi:
  *	https://projects.drogon.net/raspberry-pi/wiringpi/
@@ -21,13 +23,39 @@
  ***********************************************************************
  */
 
-
 #include <stdio.h>
+#include <wiringPi.h>
+
+// LED Pin - wiringPi pin 0 is BCM_GPIO 17.
 
-void doPins (void)
+#define	LED	0
+
+PI_THREAD (blinky)
 {
-  printf ("The pins command has been deprecated - sorry. Please use the\n") ;
-  printf ("  gpio readall\n") ;
-  printf ("command to get a list of the pinnouts for your Pi.\n") ;
+  for (;;)
+  {
+    digitalWrite (LED, HIGH) ;	// On
+    delay (500) ;		// mS
+    digitalWrite (LED, LOW) ;	// Off
+    delay (500) ;
+  }
 }
 
+
+int main (void)
+{
+  printf ("Raspberry Pi blink\n") ;
+
+  wiringPiSetup () ;
+  pinMode (LED, OUTPUT) ;
+
+  piThreadCreate (blinky) ;
+
+  for (;;)
+  {
+    printf ("Hello, world\n") ;
+    delay (600) ;
+  }
+
+  return 0 ;
+}

examples/delayTest.c

@@ -25,7 +25,6 @@
 
 #include <stdio.h>
 #include <unistd.h>
-#include <wiringPi.h>
 
 #include <sys/time.h>
 
@@ -34,17 +33,13 @@
 int main()
 {
   int x ;
-  struct timeval t1, t2 ;
+  struct timeval t1, t2, t3 ;
   int t ;
   int max, min ;
   int del ;
-  int underRuns, overRuns, exactRuns, total ;
+  int underRuns, overRuns, exactRuns, bogusRuns, total ;
   int descheds ;
 
-  if (wiringPiSetup () == -1)
-    return 1 ;
-
-  piHiPri (10) ; sleep (1) ;
 
 // Baseline test
 
@@ -58,21 +53,22 @@ int main()
   {
     underRuns = overRuns = exactRuns = total = 0 ;
     descheds = 0 ;
-    max = del ;
-    min = del ;
+    max =   0 ;
+    min = 999 ;
 
     for (x = 0 ; x < CYCLES ; ++x)
     {
       for (;;)				// Repeat this if we get a delay over 999uS
       {					// -> High probability Linux has deschedulled us
 	gettimeofday (&t1, NULL) ;
-	  delayMicroseconds (del) ;
+	  usleep (del) ;
+//          delayMicroseconds (del) ;
 	gettimeofday (&t2, NULL) ;
 
-	if (t2.tv_usec < t1.tv_usec)	// Counter wrapped
-	  t = (1000000 + t2.tv_usec) - t1.tv_usec;
-	else
-	  t = t2.tv_usec - t1.tv_usec ;
+	timersub (&t2, &t1, &t3) ;
+
+	t = t3.tv_usec ;
+
 	if (t > 999)
 	{
 	  ++descheds ;
@@ -82,25 +78,24 @@ int main()
 	  break ;
       }
 
+      if (t == del)
+	++exactRuns ;
+      else if (t < del)
+	++underRuns ;
+      else if (t > del)
+	++overRuns ;
+
       if (t > max)
-      {
         max = t ;
-	++overRuns ;
-      }
       else if (t < min)
-      {
 	min = t ;
-	++underRuns ;
-      }
-      else
-	++exactRuns ;
 
       total += t ;
     }
     printf ("Delay: %3d. Min: %3d, Max: %3d, Unders: %3d, Overs: %3d, Exacts: %3d, Average: %3d,  Descheds: %2d\n",
 	del, min, max, underRuns, overRuns, exactRuns, total / CYCLES,  descheds) ;
     fflush (stdout) ;
-    delay (1) ;
+    usleep (1000) ;
   }
 
   return 0 ;

gpio/Makefile

@@ -42,7 +42,7 @@ LIBS    = -lwiringPi -lwiringPiDev -lpthread -lrt -lm -lcrypt
 # May not need to  alter anything below this line
 ###############################################################################
 
-SRC	=	gpio.c readall.c pins.c
+SRC	=	gpio.c readall.c
 
 OBJ	=	$(SRC:.c=.o)
 
@@ -77,22 +77,22 @@ ifneq ($(WIRINGPI_SUID),0)
 	$Q chown root.root	$(DESTDIR)$(PREFIX)/bin/gpio
 	$Q chmod 4755		$(DESTDIR)$(PREFIX)/bin/gpio
 endif
-	$Q mkdir -p		$(DESTDIR)$(PREFIX)/man/man1
-	$Q cp gpio.1		$(DESTDIR)$(PREFIX)/man/man1
+	$Q mkdir -p		$(DESTDIR)$(PREFIX)/share/man/man1
+	$Q cp gpio.1		$(DESTDIR)$(PREFIX)/share/man/man1
 
 .PHONY:	install-deb
 install-deb:	gpio
 	$Q echo "[Install: deb]"
 	$Q install -m 0755 -d							~/wiringPi/debian-template/wiringPi/usr/bin
 	$Q install -m 0755 gpio							~/wiringPi/debian-template/wiringPi/usr/bin
-	$Q install -m 0755 -d							~/wiringPi/debian-template/wiringPi/man/man1
-	$Q install -m 0644 gpio.1						~/wiringPi/debian-template/wiringPi/man/man1
+	$Q install -m 0755 -d							~/wiringPi/debian-template/wiringPi/usr/share/man/man1
+	$Q install -m 0644 gpio.1						~/wiringPi/debian-template/wiringPi/usr/share/man/man1
 
 .PHONY:	uninstall
 uninstall:
 	$Q echo "[UnInstall]"
 	$Q rm -f $(DESTDIR)$(PREFIX)/bin/gpio
-	$Q rm -f $(DESTDIR)$(PREFIX)/man/man1/gpio.1
+	$Q rm -f $(DESTDIR)$(PREFIX)/share/man/man1/gpio.1
 
 .PHONY:	depend
 depend:

gpio/gpio.1

@@ -1,4 +1,4 @@
-.TH GPIO 1 "September 2015" wiringPi "Command-Line access to Raspberry Pi's GPIO"
+.TH GPIO 1 "March 2018" wiringPi "Command-Line access to Raspberry Pi's GPIO"
 
 .SH NAME
 gpio \- Command-line access to Raspberry Pi's GPIO
@@ -9,7 +9,7 @@ gpio \- Command-line access to Raspberry Pi's GPIO
 .PP
 .B gpio
 .B [ \-g | \-1 ]
-.B mode/read/write/aread/awrite/wb/pwm/clock/toggle/blink ...
+.B mode/read/write/aread/awrite/wb/pwm/pwnTone/clock/toggle/blink ...
 .PP
 .B gpio
 .B [ \-x extension:params ]
@@ -21,6 +21,11 @@ gpio \- Command-line access to Raspberry Pi's GPIO
 .B ...
 .PP
 .B gpio
+.B [ \-p ]
+.B pwnTone pin frequency
+.B ...
+.PP
+.B gpio
 .B readall
 .PP
 .B gpio
@@ -257,30 +262,6 @@ Change the PWM mode to balanced (the default) or mark:space ratio (traditional)
 Change the PWM range register. The default is 1024.
 
 .TP
-.B load i2c [baudrate]
-This loads the i2c or drivers into the kernel and changes the permissions
-on the associated /dev/ entries so that the current user has access to
-them. Optionally it will set the I2C baudrate to that supplied in Kb/sec
-(or as close as the Pi can manage) The default speed is 100Kb/sec.
-
-Note: On recent kernels with the device tree enabled you should use the
-raspi-config program to load/unload the I2C device at boot time.
-
-.TP
-.B load spi
-This loads the spi drivers into the kernel and changes the permissions
-on the associated /dev/ entries so that the current user has access to
-them. It used to have the ability to change the buffer size from the
-default of 4096 bytes to an arbitrary value, however for some time the
-Pi Foundation have compiled the SPI device driver into the kernel and
-this has fixed the buffer size. The way to change it now is to edit
-the /boot/cmdline.txt file and add on spdev.bufsiz=8192 to set it to
-e.g. 8192 bytes then reboot.
-
-Note: On recent kernels with the device tree enabled you should use the
-raspi-config program to load/unload the SPI device at boot time.
-
-.TP
 .B gbr
 channel
 
@@ -360,7 +341,7 @@ Please report bugs to <projects@drogon.net>
 
 .SH COPYRIGHT
 
-Copyright (c) 2012-2015 Gordon Henderson
+Copyright (c) 2012-2018 Gordon Henderson
 This is free software; see the source for copying conditions. There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 

gpio/gpio.c

@@ -2,7 +2,7 @@
  * gpio.c:
  *	Swiss-Army-Knife, Set-UID command-line interface to the Raspberry
  *	Pi's GPIO.
- *	Copyright (c) 2012-2017 Gordon Henderson
+ *	Copyright (c) 2012-2018 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
  *	https://projects.drogon.net/raspberry-pi/wiringpi/
@@ -48,7 +48,7 @@ extern int wiringPiDebug ;
 
 extern void doReadall    (void) ;
 extern void doAllReadall (void) ;
-extern void doPins       (void) ;
+extern void doQmode      (int argc, char *argv []) ;
 
 #ifndef TRUE
 #  define	TRUE	(1==1)
@@ -56,9 +56,9 @@ extern void doPins       (void) ;
 #endif
 
 #define	PI_USB_POWER_CONTROL	38
-#define	I2CDETECT		"/usr/sbin/i2cdetect"
-#define	MODPROBE		"/sbin/modprobe"
-#define	RMMOD			"/sbin/rmmod"
+#define	I2CDETECT		"i2cdetect"
+#define	MODPROBE		"modprobe"
+#define	RMMOD			"rmmod"
 
 int wpMode ;
 
@@ -68,9 +68,9 @@ char *usage = "Usage: gpio -v\n"
               "       gpio [-d] ...\n"
               "       [-x extension:params] [[ -x ...]] ...\n"
               "       gpio [-p] <read/write/wb> ...\n"
-              "       gpio <read/write/aread/awritewb/pwm/clock/mode> ...\n"
+              "       gpio <mode/read/write/aread/awritewb/pwm/pwmTone/clock> ...\n"
               "       gpio <toggle/blink> <pin>\n"
-	      "       gpio readall/reset\n"
+	      "       gpio readall\n"
 	      "       gpio unexportall/exports\n"
 	      "       gpio export/edge/unexport ...\n"
 	      "       gpio wfi <pin> <mode>\n"
@@ -221,9 +221,7 @@ static void checkDevTree (char *argv [])
     fprintf (stderr,
 "%s: Unable to load/unload modules as this Pi has the device tree enabled.\n"
 "  You need to run the raspi-config program (as root) and select the\n"
-"  modules (SPI or I2C) that you wish to load/unload there and reboot.\n"
-"  There is more information here:\n"
-"      https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=97314\n", argv [0]) ;
+"  modules (SPI or I2C) that you wish to load/unload there and reboot.\n", argv [0]) ;
     exit (1) ;
   }
 }
@@ -1270,7 +1268,7 @@ static void doVersion (char *argv [])
 
   wiringPiVersion (&vMaj, &vMin) ;
   printf ("gpio version: %d.%d\n", vMaj, vMin) ;
-  printf ("Copyright (c) 2012-2017 Gordon Henderson\n") ;
+  printf ("Copyright (c) 2012-2018 Gordon Henderson\n") ;
   printf ("This is free software with ABSOLUTELY NO WARRANTY.\n") ;
   printf ("For details type: %s -warranty\n", argv [0]) ;
   printf ("\n") ;
@@ -1320,8 +1318,11 @@ int main (int argc, char *argv [])
 
   if (argc == 1)
   {
-    fprintf (stderr, "%s\n", usage) ;
-    return 1 ;
+    fprintf (stderr,
+"%s: At your service!\n"
+"  Type: gpio -h for full details and\n"
+"        gpio readall for a quick printout of your connector details\n", argv [0]) ;
+    exit (EXIT_FAILURE) ;
   }
 
 // Help
@@ -1329,7 +1330,7 @@ int main (int argc, char *argv [])
   if (strcasecmp (argv [1], "-h") == 0)
   {
     printf ("%s: %s\n", argv [0], usage) ;
-    return 0 ;
+    exit (EXIT_SUCCESS) ;
   }
 
 // Version & Warranty
@@ -1338,7 +1339,7 @@ int main (int argc, char *argv [])
   if ((strcmp (argv [1], "-R") == 0) || (strcmp (argv [1], "-V") == 0))
   {
     printf ("%d\n", piGpioLayout ()) ;
-    return 0 ;
+    exit (EXIT_SUCCESS) ;
   }
 
 // Version and information
@@ -1346,13 +1347,13 @@ int main (int argc, char *argv [])
   if (strcmp (argv [1], "-v") == 0)
   {
     doVersion (argv) ;
-    return 0 ;
+    exit (EXIT_SUCCESS) ;
   }
 
   if (strcasecmp (argv [1], "-warranty") == 0)
   {
     printf ("gpio version: %s\n", VERSION) ;
-    printf ("Copyright (c) 2012-2017 Gordon Henderson\n") ;
+    printf ("Copyright (c) 2012-2018 Gordon Henderson\n") ;
     printf ("\n") ;
     printf ("    This program is free software; you can redistribute it and/or modify\n") ;
     printf ("    it under the terms of the GNU Leser General Public License as published\n") ;
@@ -1367,13 +1368,13 @@ int main (int argc, char *argv [])
     printf ("    You should have received a copy of the GNU Lesser General Public License\n") ;
     printf ("    along with this program. If not, see <http://www.gnu.org/licenses/>.\n") ;
     printf ("\n") ;
-    return 0 ;
+    exit (EXIT_SUCCESS) ;
   }
 
   if (geteuid () != 0)
   {
     fprintf (stderr, "%s: Must be root to run. Program should be suid root. This is an error.\n", argv [0]) ;
-    return 1 ;
+    exit (EXIT_FAILURE) ;
   }
 
 // Initial test for /sys/class/gpio operations:
@@ -1517,7 +1518,8 @@ int main (int argc, char *argv [])
   else if (strcasecmp (argv [1], "drive"    ) == 0) doPadDrive   (argc, argv) ;
   else if (strcasecmp (argv [1], "readall"  ) == 0) doReadall    () ;
   else if (strcasecmp (argv [1], "nreadall" ) == 0) doReadall    () ;
-  else if (strcasecmp (argv [1], "pins"     ) == 0) doPins       () ;
+  else if (strcasecmp (argv [1], "pins"     ) == 0) doReadall    () ;
+  else if (strcasecmp (argv [1], "qmode"    ) == 0) doQmode      (argc, argv) ;
   else if (strcasecmp (argv [1], "i2cdetect") == 0) doI2Cdetect  (argc, argv) ;
   else if (strcasecmp (argv [1], "i2cd"     ) == 0) doI2Cdetect  (argc, argv) ;
   else if (strcasecmp (argv [1], "reset"    ) == 0) doReset      (argv [0]) ;
@@ -1531,5 +1533,6 @@ int main (int argc, char *argv [])
     fprintf (stderr, "%s: Unknown command: %s.\n", argv [0], argv [1]) ;
     exit (EXIT_FAILURE) ;
   }
+
   return 0 ;
 }

gpio/readall.c

@@ -1,7 +1,7 @@
 /*
  * readall.c:
  *	The readall functions - getting a bit big, so split them out.
- *	Copyright (c) 2012-2017 Gordon Henderson
+ *	Copyright (c) 2012-2018 Gordon Henderson
  ***********************************************************************
  * This file is part of wiringPi:
  *	https://projects.drogon.net/raspberry-pi/wiringpi/
@@ -287,16 +287,16 @@ void abReadall (int model, int rev)
 
 /*
  * piPlusReadall:
- *	Read all the pins on the model A+ or the B+
+ *	Read all the pins on the model A+ or the B+ or actually, all 40-pin Pi's
  *********************************************************************************
  */
 
 static void plus2header (int model)
 {
   /**/ if (model == PI_MODEL_AP)
-    printf (" +-----+-----+---------+------+---+--A Plus--+---+------+---------+-----+-----+\n") ;
+    printf (" +-----+-----+---------+------+---+---Pi A+--+---+------+---------+-----+-----+\n") ;
   else if (model == PI_MODEL_BP)
-    printf (" +-----+-----+---------+------+---+--B Plus--+---+------+---------+-----+-----+\n") ;
+    printf (" +-----+-----+---------+------+---+---Pi B+--+---+------+---------+-----+-----+\n") ;
   else if (model == PI_MODEL_ZERO)
     printf (" +-----+-----+---------+------+---+-Pi Zero--+---+------+---------+-----+-----+\n") ;
   else if (model == PI_MODEL_ZERO_W)
@@ -305,6 +305,8 @@ static void plus2header (int model)
     printf (" +-----+-----+---------+------+---+---Pi 2---+---+------+---------+-----+-----+\n") ;
   else if (model == PI_MODEL_3)
     printf (" +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+\n") ;
+  else if (model == PI_MODEL_3P)
+    printf (" +-----+-----+---------+------+---+---Pi 3+--+---+------+---------+-----+-----+\n") ;
   else
     printf (" +-----+-----+---------+------+---+---Pi ?---+---+------+---------+-----+-----+\n") ;
 }
@@ -348,7 +350,10 @@ void doReadall (void)
 
   /**/ if ((model == PI_MODEL_A) || (model == PI_MODEL_B))
     abReadall (model, rev) ;
-  else if ((model == PI_MODEL_BP) || (model == PI_MODEL_AP) || (model == PI_MODEL_2) || (model == PI_MODEL_3) || (model == PI_MODEL_ZERO) || (model == PI_MODEL_ZERO_W))
+  else if ((model == PI_MODEL_BP) || (model == PI_MODEL_AP) ||
+	(model == PI_MODEL_2) ||
+	(model == PI_MODEL_3) || (model == PI_MODEL_3P) ||
+	(model == PI_MODEL_ZERO) || (model == PI_MODEL_ZERO_W))
     piPlusReadall (model) ;
   else if ((model == PI_MODEL_CM) || (model == PI_MODEL_CM3))
     allReadall () ;
@@ -356,6 +361,7 @@ void doReadall (void)
     printf ("Oops - unable to determine board type... model: %d\n", model) ;
 }
 
+
 /*
  * doAllReadall:
  *	Force reading of all pins regardless of Pi model
@@ -366,3 +372,24 @@ void doAllReadall (void)
 {
   allReadall () ;
 }
+
+
+/*
+ * doQmode:
+ *	Query mode on a pin
+ *********************************************************************************
+ */
+
+void doQmode (int argc, char *argv [])
+{
+  int pin ;
+
+  if (argc != 3)
+  {
+    fprintf (stderr, "Usage: %s qmode pin\n", argv [0]) ;
+    exit (EXIT_FAILURE) ;
+  }
+
+  pin = atoi (argv [2]) ;
+  printf ("%s\n", alts [getAlt (pin)]) ;
+}

version.h

@@ -1,3 +1,3 @@
-#define VERSION "2.44"
+#define VERSION "2.46"
 #define VERSION_MAJOR 2
-#define VERSION_MINOR 44
+#define VERSION_MINOR 46

wiringPi/Makefile

@@ -40,6 +40,7 @@ CC	= gcc
 INCLUDE	= -I.
 DEFS	= -D_GNU_SOURCE
 CFLAGS	= $(DEBUG) $(DEFS) -Wformat=2 -Wall -Wextra -Winline $(INCLUDE) -pipe -fPIC
+#CFLAGS	= $(DEBUG) $(DEFS) -Wformat=2 -Wall -Wextra -Wconversion -Winline $(INCLUDE) -pipe -fPIC
 
 LIBS    = -lm -lpthread -lrt -lcrypt
 
@@ -68,13 +69,9 @@ OBJ	=	$(SRC:.c=.o)
 
 all:		$(DYNAMIC)
 
-static:		$(STATIC)
-
-$(STATIC):	$(OBJ)
-	$Q echo "[Link (Static)]"
-	$Q ar rcs $(STATIC) $(OBJ)
-	$Q ranlib $(STATIC)
-#	@size   $(STATIC)
+.PHONY:	static
+static:	
+		$Q cat noMoreStatic
 
 $(DYNAMIC):	$(OBJ)
 	$Q echo "[Link (Dynamic)]"
@@ -107,15 +104,6 @@ install:	$(DYNAMIC)
 	$Q ln -sf $(DESTDIR)$(PREFIX)/lib/libwiringPi.so.$(VERSION)	$(DESTDIR)/lib/libwiringPi.so
 	$Q $(LDCONFIG)
 
-.PHONY:	install-static
-install-static:	$(STATIC)
-	$Q echo "[Install Headers]"
-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/include
-	$Q install -m 0644 $(HEADERS)					$(DESTDIR)$(PREFIX)/include
-	$Q echo "[Install Static Lib]"
-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/lib
-	$Q install -m 0755 libwiringPi.a					$(DESTDIR)$(PREFIX)/lib
-
 .PHONY:	install-deb
 install-deb:	$(DYNAMIC)
 	$Q echo "[Install Headers: deb]"

wiringPi/noMoreStatic

@@ -0,0 +1,20 @@
+
+wiringPi is no-longer shipped with the ability to statically link it.
+
+Many reasons but the biggest issue is people who have statically linked
+wiringPi into their product - for example a Pi UPS device or a Tetris-like
+game and not subsequently shipped their modified sources. These people are
+no better than common thieves with complete disregard to the conditions
+of the LGPL that wiringPi ships with.
+
+Additionally, many think it's a good idea to statically link wiringPi
+into their favourite language - like Node, and Java and other itsy bitsy
+little things. These people have a complete and utter disregard to what
+happens underneath when e.g. the Linux kernel changes on the Pi then
+wiringPi stops as it depends on some Pi kernel features, then the poor
+user get in-touch with me and I've had over 10,000 emails so-far and
+it's now beyond a joke.
+
+DO NOT STATICALLY LINK WIRINGPI.
+
+Gordon Henderson, March 2018.

wiringPi/wiringPi.c

@@ -139,6 +139,9 @@ static volatile unsigned int GPIO_PWM ;
 #define	PAGE_SIZE		(4*1024)
 #define	BLOCK_SIZE		(4*1024)
 
+static unsigned int usingGpioMem    = FALSE ;
+static          int wiringPiSetuped = FALSE ;
+
 // PWM
 //	Word offsets into the PWM control region
 
@@ -185,15 +188,22 @@ static volatile unsigned int GPIO_PWM ;
 
 // Locals to hold pointers to the hardware
 
-static volatile uint32_t *gpio ;
-static volatile uint32_t *pwm ;
-static volatile uint32_t *clk ;
-static volatile uint32_t *pads ;
+static volatile unsigned int *gpio ;
+static volatile unsigned int *pwm ;
+static volatile unsigned int *clk ;
+static volatile unsigned int *pads ;
+static volatile unsigned int *timer ;
+static volatile unsigned int *timerIrqRaw ;
+
+// Export variables for the hardware pointers
+
+volatile unsigned int *_wiringPiGpio ;
+volatile unsigned int *_wiringPiPwm ;
+volatile unsigned int *_wiringPiClk ;
+volatile unsigned int *_wiringPiPads ;
+volatile unsigned int *_wiringPiTimer ;
+volatile unsigned int *_wiringPiTimerIrqRaw ;
 
-#ifdef	USE_TIMER
-static volatile uint32_t *timer ;
-static volatile uint32_t *timerIrqRaw ;
-#endif
 
 // Data for use with the boardId functions.
 //	The order of entries here to correspond with the PI_MODEL_X
@@ -223,7 +233,7 @@ const char *piModelNames [16] =
   "CM3",	// 10
   "Unknown11",	// 11
   "Pi Zero-W",	// 12
-  "Unknown13",	// 13
+  "Pi 3+",	// 13
   "Unknown14",	// 14
   "Unknown15",	// 15
 } ;
@@ -652,6 +662,41 @@ int wiringPiFailure (int fatal, const char *message, ...)
 
 
 /*
+ * setupCheck
+ *	Another sanity check because some users forget to call the setup
+ *	function. Mosty because they need feeding C drip by drip )-:
+ *********************************************************************************
+ */
+
+static void setupCheck (const char *fName)
+{
+  if (!wiringPiSetuped)
+  {
+    fprintf (stderr, "%s: You have not called one of the wiringPiSetup\n"
+	"  functions, so I'm aborting your program before it crashes anyway.\n", fName) ;
+    exit (EXIT_FAILURE) ;
+  }
+}
+
+/*
+ * gpioMemCheck:
+ *	See if we're using the /dev/gpiomem interface, if-so then some operations
+ *	can't be done and will crash the Pi.
+ *********************************************************************************
+ */
+
+static void usingGpioMemCheck (const char *what)
+{
+  if (usingGpioMem)
+  {
+    fprintf (stderr, "%s: Unable to do this when using /dev/gpiomem. Try sudo?\n", what) ;
+    exit (EXIT_FAILURE) ;
+  }
+}
+
+
+
+/*
  * piGpioLayout:
  *	Return a number representing the hardware revision of the board.
  *	This is not strictly the board revision but is used to check the
@@ -720,6 +765,7 @@ int piGpioLayout (void)
 //	I do not support so don't email me your bleating whinges about anything
 //	other than a genuine Raspberry Pi.
 
+#ifdef	DONT_CARE_ANYMORE
   if (! (strstr (line, "BCM2708") || strstr (line, "BCM2709") || strstr (line, "BCM2835")))
   {
     fprintf (stderr, "Unable to determine hardware version. I see: %s,\n", line) ;
@@ -730,12 +776,27 @@ int piGpioLayout (void)
     fprintf (stderr, "Raspberry Pi ONLY.\n") ;
     exit (EXIT_FAILURE) ;
   }
+#endif
+
+// Actually... That has caused me more than 10,000 emails so-far. Mosty by
+//	people who think they know better by creating a statically linked
+//	version that will not run with a new 4.9 kernel. I utterly hate and
+//	despise those people.
+//
+//	I also get bleats from people running other than Raspbian with another
+//	distros compiled kernel rather than a foundation compiled kernel, so
+//	this might actually help them. It might not - I only have the capacity
+//	to support Raspbian.
+//
+//	However, I've decided to leave this check out and rely purely on the
+//	Revision: line for now. It will not work on a non-pi hardware or weird
+//	kernels that don't give you a suitable revision line.
 
-// Right - we're Probably on a Raspberry Pi. Check the revision field for the real
+// So - we're Probably on a Raspberry Pi. Check the revision field for the real
 //	hardware type
 //	In-future, I ought to use the device tree as there are now Pi entries in
 //	/proc/device-tree/ ...
-//	but I'll leave that for the next revision.
+//	but I'll leave that for the next revision. Or the next.
 
 // Isolate the Revision line
 
@@ -938,7 +999,7 @@ void piBoardId (int *model, int *rev, int *mem, int *maker, int *warranty)
   if ((revision &  (1 << 23)) != 0)	// New way
   {
     if (wiringPiDebug)
-      printf ("piBoardId: New Way: revision is: 0x%08X\n", revision) ;
+      printf ("piBoardId: New Way: revision is: %08X\n", revision) ;
 
     bRev      = (revision & (0x0F <<  0)) >>  0 ;
     bType     = (revision & (0xFF <<  4)) >>  4 ;
@@ -1183,7 +1244,7 @@ void pwmSetClock (int divisor)
 
 /*
  * gpioClockSet:
- *	Set the freuency on a GPIO clock pin
+ *	Set the frequency on a GPIO clock pin
  *********************************************************************************
  */
 
@@ -1322,6 +1383,8 @@ void pinModeAlt (int pin, int mode)
 {
   int fSel, shift ;
 
+  setupCheck ("pinModeAlt") ;
+
   if ((pin & PI_GPIO_MASK) == 0)		// On-board pin
   {
     /**/ if (wiringPiMode == WPI_MODE_PINS)
@@ -1351,6 +1414,8 @@ void pinMode (int pin, int mode)
   struct wiringPiNodeStruct *node = wiringPiNodes ;
   int origPin = pin ;
 
+  setupCheck ("pinMode") ;
+
   if ((pin & PI_GPIO_MASK) == 0)		// On-board pin
   {
     /**/ if (wiringPiMode == WPI_MODE_PINS)
@@ -1384,6 +1449,8 @@ void pinMode (int pin, int mode)
       if ((alt = gpioToPwmALT [pin]) == 0)	// Not a hardware capable PWM pin
 	return ;
 
+      usingGpioMemCheck ("pinMode PWM") ;
+
 // Set pin to PWM mode
 
       *(gpio + fSel) = (*(gpio + fSel) & ~(7 << shift)) | (alt << shift) ;
@@ -1398,6 +1465,8 @@ void pinMode (int pin, int mode)
       if ((alt = gpioToGpClkALT0 [pin]) == 0)	// Not a GPIO_CLOCK pin
 	return ;
 
+      usingGpioMemCheck ("pinMode CLOCK") ;
+
 // Set pin to GPIO_CLOCK mode and set the clock frequency to 100KHz
 
       *(gpio + fSel) = (*(gpio + fSel) & ~(7 << shift)) | (alt << shift) ;
@@ -1416,10 +1485,7 @@ void pinMode (int pin, int mode)
 
 /*
  * pullUpDownCtrl:
- *	Control the internal pull-up/down resistors on a GPIO pin
- *	The Arduino only has pull-ups and these are enabled by writing 1
- *	to a port when in input mode - this paradigm doesn't quite apply
- *	here though.
+ *	Control the internal pull-up/down resistors on a GPIO pin.
  *********************************************************************************
  */
 
@@ -1427,6 +1493,8 @@ void pullUpDnControl (int pin, int pud)
 {
   struct wiringPiNodeStruct *node = wiringPiNodes ;
 
+  setupCheck ("pullUpDnControl") ;
+
   if ((pin & PI_GPIO_MASK) == 0)		// On-Board Pin
   {
     /**/ if (wiringPiMode == WPI_MODE_PINS)
@@ -1588,6 +1656,8 @@ void pwmWrite (int pin, int value)
 {
   struct wiringPiNodeStruct *node = wiringPiNodes ;
 
+  setupCheck ("pwmWrite") ;
+
   if ((pin & PI_GPIO_MASK) == 0)		// On-Board Pin
   {
     /**/ if (wiringPiMode == WPI_MODE_PINS)
@@ -1597,6 +1667,7 @@ void pwmWrite (int pin, int value)
     else if (wiringPiMode != WPI_MODE_GPIO)
       return ;
 
+    usingGpioMemCheck ("pwmWrite") ;
     *(pwm + gpioToPwmPort [pin]) = value ;
   }
   else
@@ -1656,6 +1727,8 @@ void pwmToneWrite (int pin, int freq)
 {
   int range ;
 
+  setupCheck ("pwmToneWrite") ;
+
   if (freq == 0)
     pwmWrite (pin, 0) ;             // Off
   else
@@ -2139,16 +2212,15 @@ int wiringPiSetup (void)
 {
   int   fd ;
   int   model, rev, mem, maker, overVolted ;
-  static int alreadyDoneThis = FALSE ;
 
 // It's actually a fatal error to call any of the wiringPiSetup routines more than once,
 //	(you run out of file handles!) but I'm fed-up with the useless twats who email
 //	me bleating that there is a bug in my code, so screw-em.
 
-  if (alreadyDoneThis)
+  if (wiringPiSetuped)
     return 0 ;
 
-  alreadyDoneThis = TRUE ;
+  wiringPiSetuped = TRUE ;
 
   if (getenv (ENV_DEBUG) != NULL)
     wiringPiDebug = TRUE ;
@@ -2204,11 +2276,18 @@ int wiringPiSetup (void)
 //	Try /dev/mem. If that fails, then 
 //	try /dev/gpiomem. If that fails then game over.
 
-  if ((fd = open ("/dev/mem", O_RDWR | O_SYNC | O_CLOEXEC) ) < 0)
+  if ((fd = open ("/dev/mem", O_RDWR | O_SYNC | O_CLOEXEC)) < 0)
   {
-    if ((fd = open ("/dev/gpiomem", O_RDWR | O_SYNC | O_CLOEXEC) ) < 0)
-      return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: Unable to open /dev/mem or /dev/gpiomem: %s.\n  Try running with sudo?\n", strerror (errno)) ;
-    piGpioBase = 0 ;
+    if ((fd = open ("/dev/gpiomem", O_RDWR | O_SYNC | O_CLOEXEC) ) >= 0)	// We're using gpiomem
+    {
+      piGpioBase   = 0 ;
+      usingGpioMem = TRUE ;
+    }
+    else
+      return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: Unable to open /dev/mem or /dev/gpiomem: %s.\n"
+	"  Aborting your program because if it can not access the GPIO\n"
+	"  hardware then it most certianly won't work\n"
+	"  Try running with sudo?\n", strerror (errno)) ;
   }
 
 // Set the offsets into the memory interface.
@@ -2245,7 +2324,6 @@ int wiringPiSetup (void)
   if (pads == MAP_FAILED)
     return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: mmap (PADS) failed: %s\n", strerror (errno)) ;
 
-#ifdef	USE_TIMER
 //	The system timer
 
   timer = (uint32_t *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, GPIO_TIMER) ;
@@ -2259,7 +2337,14 @@ int wiringPiSetup (void)
   *(timer + TIMER_CONTROL) = 0x0000280 ;
   *(timer + TIMER_PRE_DIV) = 0x00000F9 ;
   timerIrqRaw = timer + TIMER_IRQ_RAW ;
-#endif
+
+// Export the base addresses for any external software that might need them
+
+  _wiringPiGpio  = gpio ;
+  _wiringPiPwm   = pwm ;
+  _wiringPiClk   = clk ;
+  _wiringPiPads  = pads ;
+  _wiringPiTimer = timer ;
 
   initialiseEpoch () ;
 
@@ -2325,16 +2410,10 @@ int wiringPiSetupSys (void)
   int pin ;
   char fName [128] ;
 
-  static int alreadyDoneThis = FALSE ;
-
-// It's actually a fatal error to call any of the wiringPiSetup routines more than once,
-//	(you run out of file handles!) but I'm fed-up with the useless twats who email
-//	me bleating that there is a bug in my code, so screw-em.
-
-  if (alreadyDoneThis)
+  if (wiringPiSetuped)
     return 0 ;
 
-  alreadyDoneThis = TRUE ;
+  wiringPiSetuped = TRUE ;
 
   if (getenv (ENV_DEBUG) != NULL)
     wiringPiDebug = TRUE ;

wiringPi/wiringPi.h

@@ -99,6 +99,7 @@
 #define	PI_MODEL_ZERO		 9
 #define	PI_MODEL_CM3		10
 #define	PI_MODEL_ZERO_W		12
+#define	PI_MODEL_3P 		13
 
 #define	PI_VERSION_1		0
 #define	PI_VERSION_1_1		1
@@ -162,6 +163,15 @@ struct wiringPiNodeStruct
 
 extern struct wiringPiNodeStruct *wiringPiNodes ;
 
+// Export variables for the hardware pointers
+
+extern volatile unsigned int *_wiringPiGpio ;
+extern volatile unsigned int *_wiringPiPwm ;
+extern volatile unsigned int *_wiringPiClk ;
+extern volatile unsigned int *_wiringPiPads ;
+extern volatile unsigned int *_wiringPiTimer ;
+extern volatile unsigned int *_wiringPiTimerIrqRaw ;
+
 
 // Function prototypes
 //	c++ wrappers thanks to a comment by Nick Lott

wiringPi/wpiExtensions.c

@@ -871,7 +871,7 @@ int loadWPiExtension (char *progName, char *extensionData, int printErrors)
   char *p ;
   char *extension = extensionData ;
   struct extensionFunctionStruct *extensionFn ;
-  unsigned pinBase = 0 ;
+  int pinBase = 0 ;
 
   verbose = printErrors ;