#263 Add PWM to Makefile

wiringPi/test/Makefile

@@ -2,13 +2,13 @@ CC = gcc
 CFLAGS = -Wall
 LDFLAGS =
 
-# Need BCM26 <-> BCM19 connected (1kOhm)
-tests = wiringpi_test1_sysfs wiringpi_test2_sysfs wiringpi_test3_device_wpi wiringpi_test4_device_phys wiringpi_test5_default wiringpi_test6_isr wiringpi_test7_version
+# Need BCM19 <-> BCM26, +PWM: BCM12 <-> BCM13, BCM18 <-> BCM17 connected (1kOhm)
+tests = wiringpi_test1_sysfs wiringpi_test2_sysfs wiringpi_test3_device_wpi wiringpi_test4_device_phys wiringpi_test5_default wiringpi_test6_isr wiringpi_test7_version wiringpi_test9_pwm
 
 # Need XO hardware
-xotests = wiringpi_xotest_test1_spi wiringpi_i2c_test1_pcf8574
+xotests = wiringpi_xotest_test1_spi wiringpi_i2c_test1_pcf8574 wiringpi_test9_pwm
 
-# Need PiFace hardware and tests condition
+# Need PiFace hardware and BCM23 <-> BCM24 , BCM18 <-> BCM17 connected (1kOhm), and PiFace Out7<->In4, Out6<->In5, R0_NO<->In6, R0_NO<->In7, R_C<-100Ohm->GND
 pifacetests = wiringpi_piface_test1 wiringpi_test9_pwm
 
 all: $(tests) $(xotests) $(pifacetests)

wiringPi/test/wiringpi_test9_pwm.c

@@ -141,7 +141,7 @@ int main (void) {
         return UnitTestState();
       }
       printf("Wait for start ...\n");
-      delay(250);
+      delay(500);
       printf("Start:\n");
       //MeasureAndCheckFreq("50\% Duty (default)", 300.000);   //FAIL , freq (pwmc=32) to high for irq count
 
@@ -215,5 +215,8 @@ int main (void) {
      printf("set PWM@GPIO%d (output) back to input\n", PWM);
      pinMode(PWM, INPUT);
    }
+
+   printf("\nDid %d PWM GPIO tests with model %d\n", testruns, RaspberryPiModel);
+
    return UnitTestState();
 }