heuzef
/
WiringPi
zrcadlo https://github.com/WiringPi/WiringPi.git
1
0
Rozštěpit 0
Zdrojový kód Úkoly 0 Vydání 9 Wiki Aktivita
Procházet zdrojové kódy

#208

pull/205/head
mstroh76 před 8 měsíci
rodič
b832d204e5
revize
4046741cd7
2 změnil soubory, kde provedl 115 přidání a 115 odebrání
Rozdělené zobrazení
Diff Options
Zobrazit statistiky Stáhněte soubor opravy Stáhněte rozdílový soubor
  1. +51
    -114
      wiringPi/wiringPi.c
  2. +64
    -1
      wiringPi/wiringPiLegacy.c

+ 51
- 114
wiringPi/wiringPi.c Zobrazit soubor

@@ -854,6 +854,36 @@ static void usingGpioMemCheck (const char *what)
}


void PrintSystemStdErr () {
struct utsname sys_info;
if (uname(&sys_info) == 0) {
fprintf (stderr, " wiringpi = %d.%d\n", VERSION_MAJOR, VERSION_MINOR);
fprintf (stderr, " system name = %s\n", sys_info.sysname);
//fprintf (stderr, " node name = %s\n", sys_info.nodename);
fprintf (stderr, " release = %s\n", sys_info.release);
fprintf (stderr, " version = %s\n", sys_info.version);
fprintf (stderr, " machine = %s\n", sys_info.machine);
if (strstr(sys_info.machine, "arm") == NULL && strstr(sys_info.machine, "aarch")==NULL) {
fprintf (stderr, " -> This is not an ARM architecture; it cannot be a Raspberry Pi.\n") ;
}
}
}


void piFunctionOops (const char *function, const char* suggestion, const char* url)
{
fprintf (stderr, "Oops: Function %s is not supported\n", function) ;
PrintSystemStdErr();
if (suggestion) {
fprintf (stderr, " -> Please %s\n", suggestion) ;
}
if (url) {
fprintf (stderr, " -> See info at %s\n", url) ;
}
fprintf (stderr, " -> Check at https://github.com/wiringpi/wiringpi/issues.\n\n") ;
exit (EXIT_FAILURE) ;
}


/*
* piGpioLayout:
@@ -884,21 +914,10 @@ static void usingGpioMemCheck (const char *what)
void piGpioLayoutOops (const char *why)
{
fprintf (stderr, "Oops: Unable to determine Raspberry Pi board revision from %s and from /proc/cpuinfo\n", revfile) ;
struct utsname sys_info;
if (uname(&sys_info) == 0) {
fprintf (stderr, " system name = %s\n", sys_info.sysname);
//fprintf (stderr, " node name = %s\n", sys_info.nodename);
fprintf (stderr, " release = %s\n", sys_info.release);
fprintf (stderr, " version = %s\n", sys_info.version);
fprintf (stderr, " machine = %s\n", sys_info.machine);
}
if (strstr(sys_info.machine, "arm") == NULL && strstr(sys_info.machine, "aarch")==NULL) {
fprintf (stderr, " -> This is not an ARM architecture; it cannot be a Raspberry Pi.\n") ;
fprintf (stderr, " -> WiringPi is designed for Raspberry Pi and can only be used with a Raspberry Pi.\n\n") ;
} else {
fprintf (stderr, " -> %s\n", why) ;
fprintf (stderr, " -> Check at https://github.com/wiringpi/wiringpi/issues.\n\n") ;
}
PrintSystemStdErr();
fprintf (stderr, " -> %s\n", why) ;
fprintf (stderr, " -> WiringPi is designed for Raspberry Pi and can only be used with a Raspberry Pi.\n\n") ;
fprintf (stderr, " -> Check at https://github.com/wiringpi/wiringpi/issues.\n\n") ;
exit (EXIT_FAILURE) ;
}

@@ -1744,19 +1763,12 @@ void pullUpDnControl (int pin, int pud)

int digitalRead (int pin)
{
char c ;
struct wiringPiNodeStruct *node = wiringPiNodes ;

if ((pin & PI_GPIO_MASK) == 0) // On-Board Pin
{
/**/ if (wiringPiMode == WPI_MODE_GPIO_SYS) // Sys mode
{
if (sysFds [pin] == -1)
return LOW ;

lseek (sysFds [pin], 0L, SEEK_SET) ;
read (sysFds [pin], &c, 1) ;
return (c == '0') ? LOW : HIGH ;
}
if (wiringPiMode == WPI_MODE_GPIO_SYS)
return LOW ;
else if (wiringPiMode == WPI_MODE_PINS)
pin = pinToGpio [pin] ;
else if (wiringPiMode == WPI_MODE_PHYS)
@@ -1819,17 +1831,8 @@ void digitalWrite (int pin, int value)

if ((pin & PI_GPIO_MASK) == 0) // On-Board Pin
{
/**/ if (wiringPiMode == WPI_MODE_GPIO_SYS) // Sys mode
{
if (sysFds [pin] != -1)
{
if (value == LOW)
write (sysFds [pin], "0\n", 2) ;
else
write (sysFds [pin], "1\n", 2) ;
}
if (wiringPiMode == WPI_MODE_GPIO_SYS) // Sys mode
return ;
}
else if (wiringPiMode == WPI_MODE_PINS)
pin = pinToGpio [pin] ;
else if (wiringPiMode == WPI_MODE_PHYS)
@@ -2000,13 +2003,8 @@ void digitalWriteByte (const int value)

FailOnModel5();

/**/ if (wiringPiMode == WPI_MODE_GPIO_SYS)
if (wiringPiMode == WPI_MODE_GPIO_SYS)
{
for (pin = 0 ; pin < 8 ; ++pin)
{
digitalWrite (pinToGpio [pin], value & mask) ;
mask <<= 1 ;
}
return ;
}
else
@@ -2034,13 +2032,9 @@ unsigned int digitalReadByte (void)

FailOnModel5();

/**/ if (wiringPiMode == WPI_MODE_GPIO_SYS)
if (wiringPiMode == WPI_MODE_GPIO_SYS)
{
for (pin = 0 ; pin < 8 ; ++pin)
{
x = digitalRead (pinToGpio [pin]) ;
data = (data << 1) | x ;
}
return 0;
}
else
{
@@ -2067,19 +2061,10 @@ unsigned int digitalReadByte (void)

void digitalWriteByte2 (const int value)
{
register int mask = 1 ;
register int pin ;

FailOnModel5();

/**/ if (wiringPiMode == WPI_MODE_GPIO_SYS)
if (wiringPiMode == WPI_MODE_GPIO_SYS)
{
for (pin = 20 ; pin < 28 ; ++pin)
{
digitalWrite (pin, value & mask) ;
mask <<= 1 ;
}
return ;
}
else
{
@@ -2090,18 +2075,12 @@ void digitalWriteByte2 (const int value)

unsigned int digitalReadByte2 (void)
{
int pin, x ;
uint32_t data = 0 ;

FailOnModel5();

/**/ if (wiringPiMode == WPI_MODE_GPIO_SYS)
if (wiringPiMode == WPI_MODE_GPIO_SYS)
{
for (pin = 20 ; pin < 28 ; ++pin)
{
x = digitalRead (pin) ;
data = (data << 1) | x ;
}
}
else
data = ((*(gpio + gpioToGPLEV [0])) >> 20) & 0xFF ; // First bank for these pins
@@ -2824,60 +2803,18 @@ int wiringPiSetupPhys (void)

/*
* wiringPiSetupSys:
* Must be called once at the start of your program execution.
*
* Initialisation (again), however this time we are using the /sys/class/gpio
* interface to the GPIO systems - slightly slower, but always usable as
* a non-root user, assuming the devices are already exported and setup correctly.
* GPIO Sysfs Interface for Userspace is deprecated
* https://www.kernel.org/doc/html/v5.5/admin-guide/gpio/sysfs.html
* The last Raspberry Pi Kernel with Sysfs was 6.1.
* If needed, please use WiringPi 3.1.
*
*/

int wiringPiSetupSys (void)
{
char fName [128] ;

if (wiringPiSetuped)
return 0 ;

wiringPiSetuped = TRUE ;

if (getenv (ENV_DEBUG) != NULL)
wiringPiDebug = TRUE ;

if (getenv (ENV_CODES) != NULL)
wiringPiReturnCodes = TRUE ;

if (wiringPiDebug)
printf ("wiringPi: wiringPiSetupSys called\n") ;

int model, rev, mem, maker, overVolted ;
piBoardId (&model, &rev, &mem, &maker, &overVolted) ;

if (piGpioLayout () == GPIO_LAYOUT_PI1_REV1)
{
pinToGpio = pinToGpioR1 ;
physToGpio = physToGpioR1 ;
}
else
{
pinToGpio = pinToGpioR2 ;
physToGpio = physToGpioR2 ;
}

// Open and scan the directory, looking for exported GPIOs, and pre-open
// the 'value' interface to speed things up for later

for (int pin = 0, maxpin=GetMaxPin() ; pin <= maxpin ; ++pin)
{
int pinFS = GPIOToSysFS(pin);
if (pinFS>=0) {
sprintf (fName, "/sys/class/gpio/gpio%d/value", pinFS) ;
sysFds [pin] = open (fName, O_RDWR) ;
}
}

initialiseEpoch () ;

wiringPiMode = WPI_MODE_GPIO_SYS ;
piFunctionOops("wiringPiSetupSys",
"use wringpi 3.1 (last version with GPIO Sysfs interface)",
"https://www.kernel.org/doc/html/v5.5/admin-guide/gpio/sysfs.html");

return 0 ;
}

+ 64
- 1
wiringPi/wiringPiLegacy.c Zobrazit soubor

@@ -185,4 +185,67 @@ int piGpioLayoutLegacy (void)
printf ("piGpioLayout: Returning revision: %d\n", gpioLayout) ;

return gpioLayout ;
}
}


/*
* wiringPiSetupSys:
* Must be called once at the start of your program execution.
*
* Initialisation (again), however this time we are using the /sys/class/gpio
* interface to the GPIO systems - slightly slower, but always usable as
* a non-root user, assuming the devices are already exported and setup correctly.
*/

/*
int wiringPiSetupSys (void)
{
char fName [128] ;

if (wiringPiSetuped)
return 0 ;

wiringPiSetuped = TRUE ;

if (getenv (ENV_DEBUG) != NULL)
wiringPiDebug = TRUE ;

if (getenv (ENV_CODES) != NULL)
wiringPiReturnCodes = TRUE ;

if (wiringPiDebug)
printf ("wiringPi: wiringPiSetupSys called\n") ;

int model, rev, mem, maker, overVolted ;
piBoardId (&model, &rev, &mem, &maker, &overVolted) ;

if (piGpioLayout () == GPIO_LAYOUT_PI1_REV1)
{
pinToGpio = pinToGpioR1 ;
physToGpio = physToGpioR1 ;
}
else
{
pinToGpio = pinToGpioR2 ;
physToGpio = physToGpioR2 ;
}

// Open and scan the directory, looking for exported GPIOs, and pre-open
// the 'value' interface to speed things up for later

for (int pin = 0, maxpin=GetMaxPin() ; pin <= maxpin ; ++pin)
{
int pinFS = GPIOToSysFS(pin);
if (pinFS>=0) {
sprintf (fName, "/sys/class/gpio/gpio%d/value", pinFS) ;
sysFds [pin] = open (fName, O_RDWR) ;
}
}

initialiseEpoch () ;

wiringPiMode = WPI_MODE_GPIO_SYS ;

return 0 ;
}
*/

Zapsat Náhled
Načítá se…
Zrušit
Uložit