Add spidf gpio

gpio/readall.c

@@ -94,14 +94,14 @@ static int physToWpi [64] =
    7, -1,
   -1, 16,
    0,  1,
-   2, -1,
+  -1, -1,
    3, -1,
   -1,  5,
   12,  4,
   13,  6,
   14, 10,
-  -1, 11,       // 25, 26
-  30, -1,	// Actually I2C, but not used
+   2, 11,       // 25, 26
+  -1, -1,	// Actually I2C, but not used
   21, 30,
   22, 26,
   23, 31,

wiringPi/khadas_vim3.c

@@ -31,7 +31,7 @@
 static const int pinToGpio_rev[64] = {
 	//wiringPi number to native gpio number
 	 -1,353,		//   0 | 1  :					  			| GPIOAO_3
-	 -1, -1,		//   2 | 3  :					  			|
+	360, -1,		//   2 | 3  :					  GPIOAO_10 |
 	300,301,		//	 4 | 5  :					  	GPIOA_0	| GPIOA_1
 	303, -1,		//	 6 | 7  :						GPIOA_3 |
 	 -1, -1,		// 	 8 | 9  :								|
@@ -67,7 +67,7 @@ static const int phyToGpio_rev[64] = {
 	 -1,300,			//	10 | 30 :					   ADC0	| GPIOA_0
 	 -1,303,			//	11 | 31 :					   1.8V	| GPIOA_3
 	 -1,302,			//	12 | 32 :					   ADC1	| GPIOA_2
-	 -1,304,			//	13 | 33 :					  SPDIF	| GPIOA_4
+	360,304,			//	13 | 33 :				  GPIOAO_10 | GPIOA_4
 	 -1, -1,			//	14 | 34 :						GND	| GND
 	326, -1,			//	15 | 35 :	  (GPIOH_6)UART_RX_AO_B | PWM-F
 	327, -1,			//	16 | 36 :	  (GPIOH_7)UART_TX_AO_B | RTC_CLK

wiringPi/khadas_vim3.h

@@ -22,7 +22,7 @@
 #define VIM3_GPIOZ_PIN_START			(VIM3_GPIO_PIN_BASE + 30)	//300+30=330
 #define VIM3_GPIOZ_PIN_END				(VIM3_GPIO_PIN_BASE + 45)
 #define VIM3_GPIOAO_PIN_START			(VIM3_GPIO_PIN_BASE + 50)	//300+50=350
-#define VIM3_GPIOAO_PIN_END				(VIM3_GPIO_PIN_BASE + 59)
+#define VIM3_GPIOAO_PIN_END				(VIM3_GPIO_PIN_BASE + 69)
 
 #define VIM3_GPIOA_FSEL_REG_OFFSET		0x120
 #define VIM3_GPIOA_OUTP_REG_OFFSET		0x121