Update README.md

README.md

@@ -2,12 +2,16 @@
 
 Eggnogg on the Raspberry PI !
 
+
+
 ## Description
 
 For all of you who need to run eggnoggplus on a raspberry pi to get frenzied parties, eggnoggpi is the right project.
 
 In this readme, you will see how to setup a PI02W to autostart with eggnoggpi, so you only need to connect 2 controller, and a screen, power on the pi, and play !
 
+
+
 ## Hardware needed
 
 * [Raspberry PI02W](https://www.kubii.com/en/nano-computers/3455-raspberry-pi-zero-2-w-5056561800004.html)
@@ -20,6 +24,8 @@ In this readme, you will see how to setup a PI02W to autostart with eggnoggpi, s
 
 Estimated total cost arround 50$
 
+
+
 ## Setup Raspbian Lite 64 bit
 
 First thing first, you'll need to install raspbian lite on your pi, you can do this just by downloading rpi-image from the official raspberry pi website https://www.raspberrypi.com/software
@@ -32,82 +38,12 @@ Connect, setup Wi-Fi and run somes update.
 
 
 
-## Disable Swap
-
-```
-sudo dphys-swapfile swapoff && \
-sudo dphys-swapfile uninstall && \
-sudo systemctl disable dphys-swapfile
-```
-
-## 
-
-## Setup BOX64
-
-Sadly, Eggnoggplus is a x86_64 program only on linux, and we do not have access to the sources, so well need a little help from an emulator to get it working.
-
-Box64 is a simple x86_64 emulator for other architecture like arm64, it can detect wether you want to start a x86_64 linux elf, and start translating the binary for you, if you need external libraries that exists on arm64, it'll use them so it won't have to translate it, you'll get more performance, very usefull on low power arm cpu like the one on the pi.
-
-```
-wget https://ryanfortner.github.io/box64-debs/box64.list -O /etc/apt/sources.list.d/box64.list
-wget -qO- https://ryanfortner.github.io/box64-debs/KEY.gpg | sudo gpg --dearmor -o /etc/apt/trusted.gpg.d/box64-debs-archive-keyring.gpg
-apt update
-apt install box64-arm64 -y
-```
-
-## 
-
-## Setup the screen
+## Install
 
-Since we installed raspbian lite on the pi, we'll need to install xorg and set it to auto login on boot, to achieve that, we'll install nodm.
-
-```
-sudo apt install -y nodm libsdl2-2.0-0 mpv antimicrox
 ```
-
-## 
-
-## Clone the repo of project
-
-```
-cd
+sudo apt install git 
 git clone https://git.heuzef.com/Flutter/eggnoggpi.git
-```
-
-## Configure Nodm
-
-You can then configure nodm or just use the configuration file with this repo
-
-```
-sudo cp /home/pi/eggnoggpi/files/etc/default/* /etc/default/
-```
-
-## Install Eggnoggplus
-
-```
-sudo cp -r /home/pi/eggnoggpi/files/home/eggnoggplus-linux/ /home/pi/
-sudo chmod +x /home/pi/eggnoggplus-linux/eggnoggplus/
-sudo chown pi:pi -R /home/pi/eggnoggplus-linux/
-cp -R /home/pi/eggnoggpi/files/home/.madgarden/ /home/pi/
-```
-
-
-
-## Install services
-
-To allow eggnogg to start on boot, we install it as a systemd service, you can write your own or just use the one with this repos
-
-```sh
-sudo cp /home/pi/eggnoggpi/files/etc/systemd/system/eggnoggpi.service /etc/systemd/system/eggnoggpi.service
-sudo cp /home/pi/eggnoggpi/files/etc/systemd/system/mpv.service /etc/systemd/system/mpv.service
-sudo cp /home/pi/eggnoggpi/files/etc/systemd/system/antimicrox.service /etc/systemd/system/antimicrox.service
-sudo systemctl daemon-reload
-sudo systemctl enable antimicrox
-sudo systemctl start antimicrox
-sudo systemctl enable eggnoggpi
-sudo systemctl enable mpv
-sudo systemctl start mpv
-sudo systemctl start eggnoggpi
-sudo echo "@reboot    root    /sbin/service eggnoggpi start" >> /etc/crontab
-cp -R /home/pi/eggnoggpi/files/home/.config/antimicrox .config/
+cd eggnogg 
+sudo apt install ./box64.deb 
+sudo apt install ./eggnogg.deb 
 ```